Floor-standing cabinets, pages 10-50, 4.44 MB

CT-2 19” Cabinets

CT-2 cabinet with solid bottom plate and top plate adapted
for PD fan unit assembly – Tailor made

CT-2 cabinet is an enclosure based on a welded frame construction. The standard version consists of two side panels, rear panel, roof and four leveling feet. 150 type Castors may be ordered separately. The cabinet frame is made of four front posts designed to mount 19’’ equipment. This cabinet does not have a front door. The cabinet roof has four lifting eyes. Side panels and rear panel are fixed to the frame by screws. The rear part of the bottom plate and roof is provided with cable foam entries. One of these openings is situated on the bottom plate, while the other is installed in the roof (in standard version). If necessary it can also be relocated to the top plate. Top and bottom plates in CT-2 cabinets are outfitted with ventilation slots, protected by a metal braid. Non-standard cabinet delivery should always be confirmed by Hyperline Sales Department.

Materials:

Cabinet frame – 1.5 mm (0.06”) thick sheet steel Side and rear panels – 1 mm (0.04”) thick sheet steel Roof – 1 mm (0.04”) thick sheet steel

Surface finish:

The frame, roof, side and rear panels are painted with te x tured powder paint, light grey (RAL 7035) and black (RAL 9005) Application of any other color should always be confirmed by Hypeline Sales Department