|
CT cabinet is intended for 21 equipment of ETS 300119-3
standard.
CT cabinet is based on a welded frame construction. The
standard version of CT consists oftwo side panels, front
door, rear door or rear panel, two mounting profiles, grounding
strip and grounding cable set. Side and rear panels are
fixed with screws to the cabinet's frame. Both front and rear
doors are closed with two single-point locks containing patent
cylinders.
The structure allows cable entry through the sealing foam
opening, which is situated in the roofs rear part, and
through a brush opening placed beneath the rear door or
rear panel.
|
Materials:
Frame 2 mm(0.08) thick sheet steel
Panels 1 mm (0.04) thick sheet steel
Door sheet steel 1.5 mm (0.06) thick
Plexiglas 4 mm (0.16) thick
|
Protection degree:
|
IP 20 in accordance with PN 92/E-08106/EN 60529/IEC 529 standard, which can be increased up to IP 41, if required
|
Surface finish:
The cabinet is painted with te x tured powder paints, light
grey (RAL 7035) and black (RAL 9005)
Application of any other color should always be confirmed
by Hypeline Sales Department
|
Construction:
- Frame
- Side panel
- Front door with Ple x iglaswindow
- Rear door with Ple x iglaswindow
- Mounting profile
- Cable entry plate with foam strip
- Brush opening
- Grounding bar
|
