19" CW wall-mount cabinet with plexiglas door |
19" CW wall-mount cabinet
with steel door |
Description:
|
CW wall-mount cabinets are triple-sectioned. They are manufactured
in five different useful heights (from 6U to 18U).
The standard cabinet consists of three basic sections (one of
which is the door), that are joined with hinges:
19" section (box I) is 350 mm (13.8") deep and is fitted with
two 19" slotted supporting slides with adjustable depth
positioning. In the top and bottom plates there are openings
for natural or forced air ventilation. They are housed in
frames with a metal grid. At the left side of the bottom plate
there is a grounding strip. The 19" section is equipped with
a door which we offer in two variations: solid steel door or
glass door in steel frame. Doors can be opened either to the
right or to the left. Depending on cabinet height they are
fitted with one or two single-point safety locks.
Wall section (box II) is 150 mm (5.9") deep, and has a removable
rear panel and rectangular cable openings situated
in the top and bottom plates. These outlets are covered
with removable blanking plates, which are available in two
variations: a solid one, and a blanking plate with five rubber
bushings. The lower and upper parts of the rear panel
are fitted with perforated horizontal strips used for cable
management.
Cabinets are packed in cardboard. Each package also contains
four hanging brackets and a wall mounting template.
All cabinet elements are grounded.
The following elements can be ordered as supplementary
accessories:
– additional supporting slides
– mounting plate
– horizontal cross profiles designed for rear panel installation
– filtering inserts fixed to the bottom and top plate of 19"
– section in order to increase section leak integrity
– CFP-1-7035 ventilation panel
– stationary shelf I ref. No. 5
– stationary shelf II ref. No. 4 or 5
|
Material:
|
Box I and II – 1.5 mm (0.06") sheet steel
Steel door – 1 mm (0.04") sheet steel, Plexiglas 4 mm (0.16")
Rear panel – 1 mm (0.04") sheet steel
|
Surface finish:
Powder paint (textured), color – light grey (RAL 7035) and black (RAL 9005)
All other color options are available on request
|
Protection degree:
|
IP 40 in accordance with PN 92 / E-08106 / EN 60529; 529 standard
|
Construction:
- Box I
- Box II
- Door
- Rear panel
- 19" supporting slide
- Solid blanking plate
- Blanking plate with cable openings
- Frame with grid
|
Note:
1. When ordering a CW cabinet it's necessary to give catalog number that specifies dimensions and door type.
2. Supplementary accessories must be ordered separately – cross profile, extra supporting slides, ventilation panel etc.
|
Ordering
| CW-6-FS |
19" wall-mount cabinet, 6U, 337 x 600 x 540 mm (13.3" x 23.6" x 21.3"), triple-sectioned with steel door |
| CW-10-FS |
19" wall-mount cabinet, 10U, 515 x 600 x 540 mm (20.3" x 23.6" x 21.3"), triple-sectioned with steel door |
| CW-12-FS |
19" wall-mount cabinet, 12U, 604 x 600 x 540 mm (23.8" x 23.6" x 21.3"), triple-sectioned with steel door |
| CW-15-FS |
19" wall-mount cabinet, 15U, 737 x 600 x 540 mm (29" x 23.6" x 21.3"), triple-sectioned with steel door |
| CW-18-FS |
19" wall-mount cabinet, 18U, 871 x 600 x 540 mm (34.3" x 23.6" x 21.3"), triple-sectioned with steel door |
| CW-6-WG |
19" wall-mount cabinet, 6U, 337 x 600 x 540 mm (13.3" x 23.6" x 21.3"), triple-sectioned with glass door in steel frame |
| CW-10-WG |
19" wall-mount cabinet, 10U, 515 x 600 x 540 mm (20.3" x 23.6" x 21.3"), triple-sectioned with glass door in steel frame |
| CW-12-WG |
19" wall-mount cabinet, 12U, 604 x 600 x 540 mm (23.8" x 23.6" x 21.3"), triple-sectioned with glass door in steel frame |
| CW-15-WG |
19" wall-mount cabinet, 15U, 737 x 600 x 540 mm (29" x 23.6" x 21.3"), triple-sectioned with glass door in steel frame |
| CW-18-WG |
19" wall-mount cabinet, 18U, 871 x 600 x 540 mm (34.3" x 23.6" x 21.3"), triple-sectioned with glass door in steel frame |
