Description
Intended for installation of equipment which does not require full housing.
- Made of two 19" welded frames fastened with screws to double-part chassis.
- Positioning of the frames is based on a 50 mm (2") pitch pattern.
- Standard rack is placed on leveling feet.
- Possibility for using some elements of supplementary accessories for data telecom cabinets – castors, shelves, drawers, power distribution units etc.
|
CB shelves (depth till 650 mm (25.59"))
are installed into the rack
|
Rack's top
|
Rack's inside profile is
shorter than outside one
|
Material
|
2 mm (0.08") thick sheet steel
|
Surface finish
Textured powder paint, light grey (RAL 7035) and black (RAL 9005)
Other color are available upon request
|
Construction
- 19" welded frame
- Rack base
- Leveling feet or castors
Height of base:
Adjustable feet – from 25 to 50 mm (0.98" x 1.97")
Castors, 150 type – 108 mm (4.25")
|
 |
 |
 |
| Mounting of shelf to the rack |
