Flexible ProfiBus cable FC, 1x2x22 AWG FTP, in PVC jacket

1 – Jacket
2 – Shield-foil
3 – Drain wire
3 – Stranded twisted pair
4 – Main load-bearing element
The industrial communications cable designed for field buses, compatible with the bus ProfiBus. The cable is encased in aluminum foil and copper braid shield. The cable is encased in the double aluminum foil shield and copper sheath, covered with PVC jacket and is designed for application in the extended temperature range.
The cable complies with UL 1581 VW-1

Conducting material: annealed soft electrolytic copper wire, multiwire.
Core insulation: foamed polyolefin
Shield: multilayer aluminum foil and drain tinned copper conductor, foil coil coating density 100%, drain conductor 22 AWG
Jacket: PVC-compound

Technical characteristics
Conductor (core) diameter 19 x 0.16 mm (19 x 0.006") (22 AWG)
Drain conductor tinned copper wire, 22 AWG
Insulated conductor diameter 2.6 mm (0.10")
The outer jacket thickness 1.5 mm (0.06")
Cable outer diameter 21.1 kg (46.9 lbs)
Cable weight 70 kg/km (248.36 lbs/mile)
Bend radius 150 mm (5.9")
Operation temperature -40°C – +80°C (-40°F – +176°F)

Electrical characteristics:
Direct-current resistance at 20°C (68°F) 55 Ohm/km (88.51 Ohm/mile)
Electric capacity at 31.25 kHz 52 pF/m (15.85 pF/ft)
Wave impedance at 1-20 MHz 150 ± 15 Ohm
Operating voltage 250 V
Attenuation coefficient at 16 MHz 42 dB/km (67.59 dB/mile)
PB-F-P-PVC Flexible ProfiBus cable FC, 1x2x22 AWG FTP, in PVC jacket
  There is a Minimum Order Quantity applied to this product. Contact our Sales Department for more information