ProfiBus cable, 1x2x22 AWG SFTP, in PVC jacket

1 – Jacket
2 – Shield-foil
3 – Shield-braid
4 – Solid twisted pair
5 – Main load-bearing element
The industrial communications cable designed for application within field buses at the process level, compatible with the bus ProfiBus. The cable includes one twisted pair and two load-bearing elements. The cable is encased in aluminum foil and copper braid shield and copper sheath, covered with light-stabilized fire-resistant PVC jacket and is designed for application in the extended temperature range.
The cable complies with UL 1581 VW-1, UL CMX and IEC 60332-1.

Conducting material: annealed soft electrolytic copper wire, monolithic.
Core insulation: polyolefin
Shield: tinned copper wire braid
Jacket: light-stabilized fire-resistant PVC-compound

Technical characteristics
Conductor (core) diameter 0.64 mm (0.025") (22 AWG)
Insulated conductor diameter 2.55 mm (0.10")
The outer jacket thickness 0.95 mm (0.037")
Cable outer diameter 7.8 mm (0.31")
Cable weight per 1000 ft 20 kg (44.2 lbs)
Bend radius 80 mm (3.15")
Operation temperature -40°C – +70°C (-40°F – +158°F)

Electrical characteristics:
Direct-current resistance at 20°C (68°F) 55 Ohm/km (88.51 Ohm/mile)
Electric capacity at 31.25 kHz 28 pF/m (8.53 pF/ft)
Wave impedance at 1-20 MHz 150 ± 15 Ohm
Operating voltage 250 V
Attenuation coefficient at 16 MHz 42 dB/km (67.59 dB/mile)
PB-S-PVC ProfiBus cable, 1x2x22 AWG SFTP, in PVC jacket
  There is a Minimum Order Quantity applied to this product. Contact our Sales Department for more information