Catalog

Shielded Twisted Pair Cable (SSTP), 4 pairs, Solid, Indoor, 23 AWG, LSZH, Category 7 (1000 MHz)

Shielded twisted pair cable SSTP, category 7 (1000 MHz), 4 pairs, solid, 23 AWG, LSZH
1 – Jacket
2 – Shield-braid
3 – Drain wire
4 – Shield-foil
5 – Solid twisted pair

Specifications:
Meets IEC 61156-5, IEC 61156-5 category 5e, 6, 7 requirements and ISO/IEC
11801 category 7 requirements
Fire protection – CM
The cable meets UL 1581 VW-1, IEC 60332-1 fire safety standard

Description:
Shielded Copper cable, 4 pairs, category 7 (1000 MHz, 10GbE), solid
4 separately foil-shielded pairs
General shield: wire braid
Cable is used for indoor installation

Materials:
Conductive material: wire made of soft annealed electrolytic copper
Conductor insulation: cellular PO
The cable jacket: FR-LSZH
Shield: every pair is separately shielded with polyester aluminum foil (foil is on the outside), which covers 100% of twisted pair
General shield: tin Copper braid - 60% minimum
Drain wire: tinned copper

Technical characteristics:
Conductor diameter: 23 AWG
Insulated conductor diameter: 1.34 mm (0.05")
Outer cable diameter: 8,0 mm (0.31")
Drain wire diameter: 24 AWG
Maximum bend radius: 120 mm (4.72")
Pulling strength: 140 N max.
Operating temperature: -40C - +70C (-40F - +158F)
Weight per 1000 ft (304.8 m): 43,65 lbs (19.8 kg)
Standard package: 500 m (1640 ft)

Electrical characteristics:
Frequency, MHz Attenuation at 20C, dB/100m PS NEXT, dB NEXT, dB RL, dB PS ANEXT, dB PS ELFEXT, dB ELFEXT, dB
Typical Value Cat. 7 Typical Value Cat. 7 Typical Value Cat. 7 Typical Value Cat. 7 Typical Value Cat. 7 Typical Value Cat. 7 Typical Value Cat. 7
1 2.0 2.0 105.0 99.4 108.0 102.4 22.0 20.0 68.0 - 95.0 75.0 98.0 78.0
4 3.6 3.7 98.0 90.4 101.0 93.4 25.0 23.0 68.0 - 90.0 75.0 93.0 78.0
10 5.6 5.8 95.0 84.4 98.0 87.4 28.0 25.0 68.0 - 86.0 71.0 89.0 74.0
20 7.9 8.3 90.0 80.0 93.0 83.0 28.0 25.0 68.0 - 80.0 65.0 83.0 68.0
30 9.7 10.2 85.0 77.2 88.0 80.2 27.0 23.8 68.0 - 76.0 61.5 79.0 64.5
100 18.0 19.0 80.0 69.4 83.0 72.4 24.0 21.1 68.0 - 66.0 51.0 69.0 54.0
150 22.4 23.6 78.0 66.7 81.0 69.7 22.0 18.8 65.0 - 63.0 47.5 66.0 50.5
200 26.0 27.5 78.0 65.0 81.0 68.0 21.0 18.0 65.0 - 60.0 45.0 63.0 48.0
250 29.4 31.0 75.0 63.4 78.0 66.4 20.0 17.3 62.0 - 58.0 43.0 61.0 46.0
300 32.5 34.2 75.0 62.2 78.0 65.2 19.0 17.3 62.0 - 52.0 41.5 55.0 44.5
400 38.0 40.0 70.0 60.4 73.0 63.4 19.0 17.3 62.0 - 49.0 38.9 52.0 41.9
500 43.0 45.2 70.0 58.9 73.0 61.9 19.0 17.3 62.0 - 47.0 37.0 50.0 40.0
600 47.6 50.1 70.0 57.7 73.0 60.7 19.0 17.3 62.0 - 45.0 35.4 48.0 38.4


Conductor resistance at 20°C (68°F) 80.0 Ohm/km (128.75 Ohm/mile)
DC Resistance Unbalance 2% max
Resistance at frequency 1-600 MHz 100 ± 15 Ohm
Transfer impedance at frequency 1-10 MHz 5 MOhm/m (1.52 MOhm/ft) max
Capacitive unbalance at frequency 1 kHz 1.2 pF/m (0.36 pF/ft) max
Maximum voltage 60 V RMS
Dielectric rigidity 700 V/min
Insulation resistance at 20°C (68°F) 152 MOhm/km (244.62 MOhm/mile) minimum
Propagation velocity 79-80%
Max propagation delay at frequency 1 MHz 5.3 ns/m (1.61 ns/ft)
Max propagation delay at frequency 10 MHz 5.0 ns/m (1.52 ns/ft)
Max propagation delay at frequency 100-600 MHz 5.0 ns/m (1.52 ns/ft)
Max derivation of propagation delay at frequency 1-600 MHz 15 ns/100 m (4.57 ns/100 ft)

Ordering:
SSTP4-C7-SOLID-INDOOR Shielded twisted pair cable (SSTP), 4 pairs, solid, indoor, 23 AWG, LSZH, category 7 (1000 MHz)