English   Français   Español  


Patch panels

Work area outlets

Keystone Jacks

Modular plugs

Cross Connection

Fiber Optic

Cable managers

Patch cords

Cables

Twisted pair cable

Indoor, unshielded
UTP solid, 4 pairs, cat. 6
UTP stranded (patch), 4 pairs, cat. 6
UTP solid, 4 pairs, cat. 6 LSZH
UTP solid, 4 pairs, cat. 6 Plenum
UTP solid 1 pair, cat. 5e, cross
UTP solid, 4 pairs, cat. 5e
UTP solid, 4 pairs, cat. 5e LSZH
UTP solid, 4 pairs, cat. 5e Plenum
UTP stranded (patch), 1 pair, cat. 5e
UTP stranded (patch), 2 pairs, cat. 5e
UTP stranded (patch), 4 pairs, cat. 5e
UTP solid, 2 pairs, cat. 5
UTP solid, 10/25/50/100 pairs, cat. 3
UTP solid, 25/50/100 pairs, cat. 5
UTP solid, 12/16/24/48/100 pairs, cat. 5
UTP solid, 8/10/12/16 pairs, cat. 5
Indoor, shielded
SSTP solid, 4 pairs, cat. 8
SSTP solid, 4 pairs, cat. 7a
SSTP solid, 4 pairs, cat. 7
SSTP stranded (patch), 4 pairs, cat. 7
USTP solid, 4 pairs, cat. 6a
SSTP stranded (patch), 4 pairs, cat. 6
STP solid, 4 pairs, cat. 6
SFTP solid, 4 pairs, cat. 6
STP stranded (patch), 4 pairs, cat. 6
FTP solid, 4 pairs, cat. 5e
FTP solid, 4 pairs, cat. 5e LSZH
FTP solid, 4 pairs, cat. 5e Plenum
FTP solid, 24/48/100 pairs, cat. 5e
SFTP solid, 4 pairs, cat. 5e
FTP stranded (patch), 4 pairs, cat. 5e
SFTP stranded (patch), 4 pairs, cat. 5e
FTP solid, 25 pairs, cat. 5
FTP solid, 10/25/50/100 pairs, cat. 3
Outdoor, unshielded
UTP solid, 4 pairs, cat. 6
UTP solid, 4 pairs, cat. 5e
UTP solid, 4 pairs, cat. 5e, with messenger
UTP solid, 2 pairs, cat. 5
UTP solid, 2 pairs, cat. 5, with messenger
UTP solid, 25/50/100 pairs, cat. 5
UTP solid, 10/25/50/100 pairs, cat. 3
UTP solid, 10/25/50/100 pairs, cat. 3, with messenger
UTP solid, 10/25/50/100 pairs, cat. 3, armored
Outdoor, shielded
SSTP solid, 4 pairs, cat. 7
SFTP solid, 4 pairs, cat. 6
STP solid, 4 pairs, cat. 6
FTP solid, 4 pairs, cat. 5e
FTP solid, 4 pairs, cat. 5e, with messenger
FTP solid, 25 pairs, cat. 5
FTP solid, 2 pairs, cat. 5
FTP solid, 2 pairs, cat. 5, with messenger
FTP solid, 10/25/50/100 pairs, cat. 3
FTP solid, 10/25/50/100 pairs, cat. 3, with messenger
FTP solid, 10/25/50/100 pairs, cat. 3, armored


Fiber-optic

Indoor
Zip-cord
With tight buffer
Multi loose tube
Indoor/outdoor
With tight buffer
Multi loose tube
Outdoor
Single loose tube
Multi loose tube, with messenger
With tight buffer, with steel armored band
Single loose tube, with steel armored band
Multi loose tube, with steel armored band
Multi loose tube, with steel armored wire

Telephone cable

UTC solid, 10/25/50/100 pairs, cat. 2
UTC stranded (patch), 4 wires, cat. 2

Hybrid cable

Multiservice
Video- and control
Indoor
Outdoor, armored

Coaxial cable

type RG-6
type RG-8
type RG-11
type RG-58
type RG-59
type RG-213

Industrial cable

Industrial Ethernet
Shielded
FTP, 4 pairs, cat.5e, solid
SFTP, 2 pairs, cat.5e, solid
SFTP, 4 pairs, cat.5e, solid
SFTP, 2 pairs, cat.5e, stranded (patch)
SFTP, 4 pairs, cat.5e, stranded (patch)
SFTP, 4 pairs, cat.5e, stranded (patch), outdoor
Shielded, for installation in rising mains
SFTP, 2 pairs, cat.5e, solid
SFTP, 4 pairs, cat.5e, solid
SFTP, 2 pairs, cat.5e, stranded (patch)
SFTP, 4 pairs, cat.5e, stranded (patch)
Unshielded
UTP, 2 pairs, cat.5e, solid
UTP, 4 pairs, cat.5e, solid
UTP, 4 pairs, cat.5e, solid, outdoor
UTP, 2 pairs, cat.5e, stranded (patch)
UTP, 4 pairs, cat.5e, stranded (patch)
Unshielded, for installation in rising mains
UTP, 2 pairs, cat.5e, solid
UTP, 4 pairs, cat.5e, solid
UTP, 2 pairs, cat.5e, stranded (patch)
UTP, 4 pairs, cat.5e, stranded (patch)
Cable of interface
Temperature range (-55°C to +70°C)
RS-485, 1 pair
RS-422/485, 2 pairs
RS-422/485, 4 pairs
Temperature range (-45°C to +80°C)
RS-485, 1 pair
RS-422/485, 2 pairs
RS-422/485, 3 pairs
RS-422/485, 4 pairs
In double PVC jacket, armored
RS-422/485, 2 pairs, every pair is separatly shielded
RS-422/485, 3 pairs, every pair is separatly shielded
RS-422/485, 4 pairs, every pair is separatly shielded
RS-422/485, 8 pairs, every pair is separatly shielded
RS-422/485, 2 pairs, common shield
ProfiBus
SFTP, 1 pair, solid, PVC jacket
SFTP, 1 pair, solid, polyethylene jacket
SFTP, 1 pair, solid, polyurethane jacket
SFTP, 1 pair, solid, PVC and polyethylene jackets
SFTP, 1 pair, solid, PVC and polyethylene jackets, armored
FC-SFTP, 1 pair, solid, PVC jacket
FC-SFTP, 1 pair, solid, polyethylene jacket
FTP, 1 pair, stranded (patch), PVC jacket
PA-STP, 1 pair, stranded (patch), PVC jacket
SFTP, 1 pair, stranded (patch), polyurethane jacket
SFTP, 1 pair, stranded (patch), FR-LSZH
L2/FIP-SFTP, 1 pair, stranded (patch), FR-LSZH

Installation accessories

Tools

Racks and cabinets

Access floor

Wire Mesh Cable Trays and
CombiRack System

Production shutdown



Catalog

Unshielded Twisted Pair Cable (UTP), 12/16/24/48/100 pairs, Category 5, Solid, Indoor


Twisted Pair Cable UTP, category 5, 8/10/12/16/24/48/100 pair, solid
Specifications:
Meets ANSI/EIA/TIA 568-A and ISO/IEC 11801 for category 5 requirements
Fire protection – CM
The cable meets UL 1581 VW-1 fire safety standard

Description:
Unshielded multi-pair copper cable, 12/16/24/48/100 pairs, category 5, solid. Cable consists of unshielded (UTP) bunches (Ø0.16" (4 mm)) of 4 twisted pairs each
Cable is used for indoor installation

Materials:
Conductive material: wire made of soft annealed electrolytic copper
Conductor insulation: HDPE
The cable jacket: PVC

Electrical characteristics:
Frequency, MHz Max Attenuation, dB/100 m (dB/100 ft) PS NEXT Loss, dB Min PS-ACR, dB/100 m (dB/100 ft)
0.772 1.8 (0.55) 64 62.2 (19.0)
1.0 2.0 (0.6) 62 60.0 (18.3)
4.0 4.1 (1.3) 53 48.9 (14.9)
8.0 5.80 (1.8) 48 42.2 (12.9)
10.0 6.5 (2.0) 47 40.5 (12.3)
16.0 8.2 (2.5) 44 35.8 (10.9)
20.0 9.3 (2.8) 42 32.8 (10.0)
25.0 10.4 (3.2) 41 30.6 (9.3)
31.25 11.7 (3.6) 39 28.3 (8.6)
62.5 17.0 (5.2) 35 18.0 (5.5)
100.0 22.0 (6.7) 32 10.0 (3.0)


Max DC Resistance at 20°C 93.8 Ohm/km (151.3 Ohm/mile)
Max Resistance Unbalance 3%
Characteristic Impedance at 1-100 MHz 100 ± 15 Ohm
Capacitance at 1 kHz 50 ± 4 pF/m (15.3 ± 1 pF/ft)
Max Capacitance unbalance at 1 kHz 3300 pF/km (5322.6 pF/mile)
Longitudinal Conversion Loss at 64 kHz 43 dB
Max. Voltage rating 300 V
Dielectric Strength of Insulation 1000 V RMS
Max. Propagation Delay
at 1 MHz
at 10 MHz
at 100 MHz

5.7 ns/m (1.74 ns/ft)
5.4 ns/m (1.64 ns/ft)
5.3 ns/m (1.61 ns/ft)
Propagation Delay Skew at 1-100 MHz 35 ns/100 m (10.67 ns/100 ft)
Insulation Resistance at 500 V 5 GOhm/km (8.05 GOhm/mile)
Nominal Velocity of Propagation 68%

12 pairs


1 – Jacket
2 – Rip-cord
3 – Protective skin
4 – Polymer tape
5 – Solid twisted pair
Technical characteristics:
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.9 mm (0.035")
Outer cable diameter: 10 mm (0.39")
Jacket thickness: 0.8 mm (0.031")
Bend radius (installation): 20 outer cable diameters
Bend radius (operation): 10 outer cable diameters
Installation temperature: 0°C – +50°C (+32°F – +122°F)
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft: 28.3 kg (62.5 lbs)
Standard package: 1000 m (3280 ft)

16 pairs


1 – Jacket
2 – Rip-cord
3 – Protective skin
4 – Polymer tape
5 – Solid twisted pair
Technical characteristics:
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.9 mm (0.035")
Outer cable diameter: 12 mm (0.47")
Jacket thickness: 0.8 mm (0.031")
Bend radius (installation): 20 outer cable diameters
Bend radius (operation): 10 outer cable diameters
Installation temperature: 0°C – +50°C (+32°F – +122°F)
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft: 36 kg (79.3 lbs)
Standard package: 1000 m (3280 ft)

24 pairs


1 – Jacket
2 – Rip-cord
3 – Polymer tape
4 – Protective skin
5 – Solid twisted pair
6 – Marking tape
7 – Central power member
Technical characteristics:
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.9 mm (0.035")
Outer cable diameter: 13 mm (0.51")
Jacket thickness: 0.8 mm (0.031")
Minimum bend radius: 10 outer cable diameters
Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
Pulling strength: 500 N
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft: 51.8 kg (114.2 lbs)
Standard package: 1000 m (3280 ft)

48 pairs


1 – Jacket
2 – Rip-cord
3 – Polymer tape
4 – Protective skin
5 – Solid twisted pair
6 – Marking tape
Technical characteristics:
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.9 mm (0.035")
Outer cable diameter: 17.6 mm (0.69")
Jacket thickness: 0.8 mm (0.031")
Minimum bend radius: 10 outer cable diameters
Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
Pulling strength: 500 N
Breakinh strength: 600 N
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft: 91.4 kg (201.6 lbs)
Standard package: 500 m (1640 ft)

100 pairs


1 – Jacket
2 – Rip-cord
3 – Polymer tape
4 – Protective skin
5 – Solid twisted pair
6 – Marking tape
7 – Central power member
Technical characteristics:
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.9 mm (0.035")
Outer cable diameter: 25.6 mm (1")
Jacket thickness: 0.8 mm (0.031")
Minimum bend radius: 10 outer cable diameters
Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
Pulling strength: 500 N
Breaking strength: 600 N
Operating temperature: -20°C – +60°C (-4°F – +140°F)
Weight per 1000 ft: 180.4 kg (397.8 lbs)
Standard package: 500 m (1640 ft)
Ordering
UTPXX-C5-SOLID-INDOOR Unshielded twisted pair cable (UTP), 12/16/24/48/100 pairs, category 5, solid, indoor

XX – quantity of pairs: 12, 16, 24, 48, 100 pairs.

 
e-mail: info@hyperline.com
Copyright © 2003-2008 Hyperline
Rambler's Top100