|
NORTEC comfort floor system combines all the advantages of a raised floor system with sub-floor heating. This solution offers great freedom to planners and architects, as there is no need for radiators. If the room gets too warm, NORTEC comfort can also be used to cool the room. As there is no drying time for the NORTEC comfort floor system, it is immediately ready for use after installation.
Range of use
Training and research rooms
Office and designing areas
Commercial and private residential constructions
Renovation projects
Projects with short construction times
Special features
The performance ratings can be matched to the particular project
Heating and cooling is possible
Floor coverings
Textile coverings
Elastic coverings
STONEline
Ceramic, Natural stone, Artificial stone
|
NORTEC comfort MX44-AL-C
 |
Heating:
Heat-flow density (without floor covering): 85 W/m2
Excess temperature of heating agent (DIN 4725-4): 17.2 K
Surface temperature: 84.2°F (29°C)
Water content: 0.058 l/rm
Temperature lag Rė, floor covering [m2K/W] (Reference values):
Carpet 0.07 0.23
Ceramic tiles 0.02
PVC 0.01
Active area approx. 75% |
NORTEC comfort MX44-AL-S
 |
Heating:
Heat-flow density (without fl oor covering): 85 W/m²
Excess temperature of heating agent (DIN 4725-4): 15.5 K
Surface temperature: 84.2°F (29°C)
Water content: 0.058 l/rm
Temperature lag Rė, fl oor covering [m²K/W] (Reference values):
Carpet 0.07 0.23
Ceramic tiles 0.02
PVC 0.01
Active area approx. 75% |
System specifications
| System designation |
NORTEC comfort |
| Type |
MX44-AL-C |
MX44-AL-S |
| Panel/material |
Calcium sulphate panel with factory-installed heating and cooling lines,
aluminum foil on bottom side |
| with 0.4 (10 mm) calcium sulphate panel on top side for thermal distribution |
with natural stone on top side for thermal distribution |
| Dimensions |
600 x 600 mm (23.6 x 23.6) |
| Panel thickness |
44 mm (1.7) |
| System weight1 |
62 kg/m2 (12.7" lbs/ft2) |
70 kg/m2 (14.3" lbs/ft2) |
| Substructure with construction heights > 500 mm (19.7) |
Steel pedestals RO stringer |
| Construction height2 |
28 1450 mm (1.1 57.1) |
| Load capacity rating (Nominal load) |
See "STATICS" supplement |
| Fireproofing3 Building Material Class of the panel |
A1 (non-combustible) F30 / REI 30 |
| Heating capacity |
85 W/m2 (7.9 W/ft2) |
| Permissible system pressure |
<= 8.3 bar |
| Suitability of coverings |
Textile coverings, Elastic coverings |
STONEline |
