Floor and more comfort

Description

The FLOOR and more comfort flooring system is a synergy of dry flooring and subfloor heating. Cooling, which is requested even more frequently in contemporary buildings, is also possible with our FLOOR and more comfort flooring system. The prefabricated calcium sulphate panels with special profiled edges are bonded to form a unified whole. It has surface profiling to accommodate flexible plastic installation lines. After being put in the groove, these active installation lines are cast over completely with a filler.

Fields of application

Industrial and factory rooms Training and research rooms Office and designing areas Housing construction Short construction times Renovation projects

Special features

The performance ratings can be tailored to the particular project Heating and cooling are possible The temperature curves below for various types of heating show that theoretically ideal heating is best approximated by the curve for subfloor heating systems. This positive effect is further enhanced by the pleasant thermal radiation

Floor coverings

Elastic coverings Textile coverings Parquet Ceramic, Natural stone, Artificial stone

System specifications

System designation	Floor and more
Type	FMC40-AL	FMC44-AL
Description
Panel/material	A calcium sulphate panel with profiled edges and surface profiling to accommodate plastic installation lines, which are later sealed with a filler; aluminium foil on bottom side
Dimensions	600 x 600 mm (23.6”x23.6”)
Panel thickness	40 mm (1.6”)	40 mm (1.6”)
System weight1	12.7 lbs/ft2 (62 kg/m2)	14.3 lbs/ft2 (62 kg/m2)
Substructure With construction heights > 500 mm (19.7”)	Steel pedestals RO stringers
Construction height2	69 – 800 mm (2.7” – 31.5”)
Load capacity rating (Nominal load)	See “STATICS“ supplement
Fireproofing3 Building-material rating of the panel Fire-resistance rating	A1 (non-combustible) F30 / REI 30
Heating capacity4	62 W/m (18.9 W/ft)	66 W/m (20.1 W/ft)
Cooling capacity5	39 W/m (11.9 W/ft)
Permissible system pressure6	<= 10 bar
Suitability of covering7	Textile coverings Elastic coverings Parquet Ceramic, Natural stone, Artificial stone

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Special heights available on request
3) According to DIN 4102/EN 13 501
4) According to DIN EN 12 64-1, dt = 12 k, without floor covering
5) According to DIN EN 47 15-1, dt = 10 k, without floor covering
6) Depends on the plastic installation lines used
7) Suitability for underfloor heating is a prerequisite

Diagram: Heating

Heating:

Heat-flow density (without floor covering): 66 W/m2 Excess temperature of heating agent: 12 K (According to DIN EN 1264 -1/3, DIN 4725-4) Temperature lag Rl, floor covering [m2K/W]: (Reference values) Carpet 0.07.– 0.23 Ceramic tiles 0.02 PVC 0.01

Diagram: Cooling

Cooling capacity:

Without floor covering: 39 W/m2 Cooling temperature: 10 K (According to DIN 4715-1)