Installation Accessories, pages 165-177, 2.37 MB

Stainless Steel Ties

Materials

Steel AISI 304 is the main sort in the family of stainless steel and contains minimum 18% Cr and 8% Ni. Such content of Cr enables forming of oxide layer on the surface, which imparts stability against the influence of different chemicals to the steel.

P/N (100 pcs. per pack)	Length, mm(in)	Width, mm(in)	Thickness, mm(in)	Bundle Ø, mm(in)	Min. Tensile Strength, kg(lbs)
FVC-130ST	130(5.12)	4.6(0.16)	0.3(0.1)	32(1.26)	45(99.21)
FVC-200ST	200(7.87)	4.6(0.16)	0.3(0.1)	50(1.97)	45(99.21)
FVC-300ST	300(11.81)	4.6(0.16)	0.3(0.1)	76(2.99)	45(99.21)
FVC-360ST	300(11.81)	4.6(0.16)	0.3(0.1)	102(4.02)	45(99.21)
FVC-370ST	370(14.57)	4.6(0.16)	0.3(0.1)	102(4.02)	45(99.21)

Materials

Steel AISI 410 is stainless steel, which is hardenable through heat treatment and possesses high wear-resistance. This steel has good ductility (in the state as received), high impact hardness, good corrosion resistance and heat resistance.

P/N (100 pcs. per pack)	Length, mm(in)	Width, mm(in)	Thickness, mm(in)
FVC-130	130(5.12)	6(0.24)	0.5(0.02)
FVC-200	200(7.87)	6(0.24)	0.5(0.02)
FVC-285	285(11.22)	6(0.24)	0.5(0.02)
FVC-370	370(14.57)	6(0.24)	0.5(0.02)
FVC-520	520(20.47)	6(0.24)	0.5(0.02)