General information
In addition to easily accommodating electric cables, Hyperline’s flooring systems also make it possible to use the cavity to ventilate, cool and heat the space above them. Using ventilation inserts makes it possible to air-condition and ventilate without producing drafts. There is an open system and a closed system.
Open systems
In these, the ventilation is carried out directly through an installation cavity, through the pressurized floor, to the various ventilation inserts and/or hexagonal ventilation outlets, and thus into the room being ventilated.
The ventilation inserts are also available with dust collectors and volume control devices.
With open systems, the structural subfloor must be installed with twocomponent sealant.
Closed systems
In closed systems, the air is conducted via a network of piping or compartments with fixed junctions to the "ventilation inserts".
Raised floor panel with four hexagonal ventilation inserts
Raised floor panel with two hexagonal ventilation inserts
Raised floor panel with one hexagonal ventilation insert
Statics
Minimum distance, edge spacing and interim spacing > 75 mm (2.95”)
Weakening – if necessary, reinforcement measures available
Ventilation inserts
Variation 1 – hexagonal air ventilation
Variation 2 – plastic diffuser 150 mm (5.9”)
Variation 3 – plastic carpet ring, d = 200 mm (7.9”)
